1-844-443-5296 support@astrolawn.com

Easy ‘Do-It-Yourself’ Installation Steps

Step 1: Prepare the base

Clear the surface area where the base of your grass will be placed. If used outdoors; remove anything unwanted (ex: old grass), then use your turf rake and hand tamper to smooth and compact the base surface.

Step 2: Position your grass

Once the base is prepared, it is recommended you use marking paint to visually plan out the installation of you new grass.

Step 3: Trim to size

After placing your grass in position; customize installation using a utility knife to carefully trim your grass to the desired size and shape, keeping the grain pointed in the same direction.

Step 4: Glue together seams

Align 2 pieces of grass with grain in the same direction. Once aligned, fold back edges to place seaming cloth and adhesive. Lay seaming cloth entire length of seam, then apply adhesive liberally and evenly.

Step 5: Secure in place

Secure edges by driving Landscape Stakes approximately every 6″- 8″ along perimeter. For large installations additional landscape stakes should be used to reinforce long seams and placed where needed.

Maintenance

AstroLawn products are built to last with little or no maintenance needed.

  • To clean simply use mild soap and water.
  • To keep out odors use Turf Infill + Pet Deodorizer.
  • When needed use a Turf Rake to brush bristle fibers upright.

Tool Requirements Checklist

Specialty Tools

Seaming Cloth (for joining rolls)

Seaming Glue (1 qt. = approx. 15-ft.)

Landscape Stakes (25 per package)

Stiff Bristle Broom (for grass fibers)

Hand Tamper (for outdoor apps)

Sprinkler Caps (if needed)

Common Tools

Utility Knife

Hammer

Yard Rake

Shovel

Hand Tamper (for outdoor apps)

Tape Measure

Shovel

Hand Tamper (for outdoor apps)

Sprinkler Caps (if needed)